Hari Cinema Sounds

Features:

Three-way Stage box design for maximum output

Molded Optimized Aperture Waveguide technology for ultra-low distortion and extremely uniform frequency response.

Low frequency section features dual 15” transducers with ribbon wire voice coils for low distortion and high efficiency.

Shallow profile for minimum behind-screen depth requirements.

Specifications:

System
Frequency Range 30 Hz – 18 kHz
System Sensitivity 104 dB,
Passive Nominal Impedance 4 ohms
LF Nominal Impedance 4 ohms
MF Nominal Impedance 8 ohms
HF Nominal Impedance 8 ohms
LF Sensitivity 105 dB, 2.83 V @ 1m
MF: 110 dB SPL, 2.83 V @ 1m (3.3 ft)
HF Sensitivity 105 dB, 2.83 V @1m
Rated Maximum SPL 127 dB, @ 1 m (3.3 ft), 133 dB peak
Passive System Input Power
Handling1
1000 W
Bi-Amp System Input Power
Handling1
LF: 1000 W
MF: 250W
HF: 100 W
Nominal Coverage 90° horizontal, -30°, +20° vertical
Crossover Frequency 1300 Hz
1Rating based on test signal of filtered random noise conforming to the International
standard IEC 268-1 (pink noise with 12 dB per octave roll-off below 40 Hz and above
5000 Hz with a peak-to-average ratio of 6 dB).
HARI continually engages in research related to product improvement. Some materials,
production methods and design refinements are introduced into existing products
without notice as a routine expression of that philosophy. For this reason, any ENQURI please contact hari the cinema sound head office.

Features:

• 1000 W (99 V) AES 2-hour power rating
• Usable response to 25 Hz (-10 dB) with no EQ; flat to 25 Hz (-3 dB) with external EQ
• 2241H VGC™ (Vented Gap Cooled) driver provides long peak-to-peak excursion, high
sensitivity and high maximum SPL capability.

Specifications:

• Frequency Range (–10 dB) 28 Hz – 500 Hz
• Frequency Response (± 3 dB) 38 Hz – 100 Hz
• Power Handling (AES 2-Hour Rating) 100 W (60Vrms), pink/IEC
• Sensitivity 97 dB, 1 W @ 1m (3.3 ft), ref 2.83 V
• Maximum Continuous Output 131 dB SPL (1 W @ 1m)
• Maximum Peak Output 137 dB SPL (1 W @ 1m)
• Nominal Impedance 8 ohms
• Minimum Impedance 5.6 ohms
• Recommended Crossover Frequency 100 Hz
• System Polarity Positive voltage to red terminal produces forward cone motion
  Input Connectors Barrier strip screw terminals.

Features:

• Frequency range: 50 Hz to 20 kHz
• High sensitivity: 91 dB SPL, 1W @ 1m (3.3 ft)
• High power handling capability: 150 watts, continuous pink noise.
• Special cabinet shape incorporates 30° angled front side.
• Lightweight, rigid molded enclosure
• Input terminals located on top of cabinet for quick access.

Specifications:

Frequency Range (-10 dB) 50 Hz – 20 kHz
Frequency Response (±3 dB) 65 Hz – 18 kHz
Input Power Handling1
(AES 100-Hour Rating)
100 W (23.4 Vrms), IEC/pink
Input Power Handling1
(AES 2-Hour Rating)
250 W (45Vrms), IEC/pink
Sensitivity2 94 dB SPL half-space (1 W @ 1m, ref 2.83 V)
91 dB SPL free-field (1 W @ 1m, ref 2.83 V)
Maximum Peak SPL3 122 dB, 1m
Maximum Continuous SPL 116 dB, 1m
Nominal Impedance 8 ohms
Minimum Impedance 5.5 ohms @ 170 Hz
Hor. Coverage Angle (-8 dB) 100° averaged 400 Hz to 12 kHz
Vert. Coverage Angle (-8 dB) 90° averaged 400 Hz to 12 kHz
Crossover Frequency 3 kHz
Polarity EIA (Positive voltage to RED terminal gives forward
cone motion)
Low Frequency Transducer
Nominal Diameter 250 mm (10 in)
38 mm (2 in) voice coil
High Frequency Transducer
Nominal Diameter 25 mm (1 in)
25 mm (1 in) voice coil